☰ Menu
ShankCheck › Guides
Find the right presser foot

Which presser foot fits my Juki?

Juki sells four different foot systems under one name: high shank screw-on for the TL straight stitch machines, low shank snap-on for most HZL home machines, high shank snap-on for a few newer HZL models, and separate feet for the MO sergers. Match your model number to a family below, then buy only feet listed for that system. Some generic "fits Juki" listings ignore the shank type. We earn a commission on purchases through our links. That does not change what we recommend.

Find your match →
Editor: Will RieggerIndependently researchedSources linkedNo extra cost to youLast checked: 2026-11-20

As an Amazon Associate we earn from qualifying purchases. This does not change your price.

Find your Juki foot system in four questions

  1. Is your machine a serger with an MO model number?MO-1000, MO-2000QVP, MO-2800 and MO-3000QVP use their own serger feet. Skip the sewing machine feet and go straight to the table row for sergers.
  2. Is it a straight stitch machine such as a TL-98, TL-2000Qi, TL-2010Q or J-150QVP?These take high shank screw-on feet. They have no zigzag, so feet with wide slots are wasted money.
  3. Is it an HZL home machine? Check whether it is a DX5, DX7, F or G model, or an NX7, DX3000QVP, DX4000QVP or UX8.DX5, DX7, F and G models are low shank snap-on. The NX7, DX3000QVP, DX4000QVP and UX8 are high shank, so low shank feet only work with Juki's high/low shank adapter.
  4. Is the foot you want a walking foot or a free motion foot?The snap-on shank covers most feet but not these two. Look for a version made for your exact model.

Quick reference

Your JukiShank / systemWhat to buyWatch out
TL-98, TL-2000Qi, TL-2010Q, TL-18QVP, J-150QVPHigh shank, screw-onHigh shank screw-on feet for straight stitch machinesNo zigzag. Do not mix with low shank HZL feet
HZL DX5, DX7, F300, F400, F600, G120, G220Low shank, snap-onSnap-on feet, plus a low shank snap-on holder if neededWalking and free motion feet do not use the snap-on holder
HZL NX7, DX3000QVP, DX4000QVP, UX8High shank, snap-onSnap-on feet directly, or low shank feet with Juki adapterHigh shank, unlike the DX5 and F series. Check the shank before you order
HZL LB5020, LB5100Janome-made machinesFeet from the Janome rangeSearch by Janome compatibility, not by Juki
MO-1000, MO-2000QVP, MO-2800, MO-3000QVP sergersSerger feet, model specificJuki serger feet by part number or an MO kitKit 40149062 is listed for MO-1000 and MO-2000QVP by most dealers (one dealer title also names MO-2800/MO-3000). Check your exact model
Older sergers: MO-114, MO-654, MO-735, MO-1200QVPSeparate foot groupLook up your exact model number firstDo not assume MO-1000 feet fit
Industrial DDL-8500, DDL-8700High shankHigh shank feet shared with the TL rangeOne retailer lists TL feet as fitting these. Confirm per foot

Our picks

Top pick

Juki TL series 1/4 inch foot with guide (high shank)

For: Owners of TL-98, TL-2000Qi, TL-2010Q and other TL models who piece quilts.

The Amazon listing names the TL series and calls it a high shank screw-on foot. It also lists Janome 1600P and Brother PQ1500S, which share the system.

Price range: Check current Amazon price

View on AmazonAd

High shank hinged zipper foot for TL series and J-150QVP

For: TL and J-150QVP owners who sew zippers, piping or edge stitching.

The retailer lists TL-98, TL-2000Qi, TL-2010Q, TL-18QVP and J-150QVP as compatible. It is a screw-on, hinged foot with a 3 mm needle-to-edge offset.

Price range: Check current Amazon price

View on AmazonAd

Juki low shank snap-on holder

For: HZL DX, F and G owners who lost the snap-on holder or want to use snap-on feet.

One retailer sells it at $7.99 and says it fits all low shank Juki models. Check your model against their compatibility tab before ordering.

Price range: About $8 at one retailer

View on AmazonAd

Low shank ruler foot

For: HZL owners who want to quilt with acrylic rulers.

Ruler feet are screw-on and cannot use the snap-on holder. One shop lists a super low shank version for shanks of 1/2 inch and under, and says it fits most low shank machines.

Price range: Check current Amazon price

View on AmazonAd

Juki basic snap-on presser foot set (household models)

For: New HZL owners who need zigzag, overcast, buttonhole, zipper and blind hem feet.

The set comes with a low shank snap-on bracket and five basic feet. The seller says the feet are not made by Juki but work on household Juki models.

Price range: Check current Amazon price

View on AmazonAd

Juki 8-piece serger foot kit 40149062

For: MO-1000 and MO-2000QVP owners who want every optional foot.

The kit holds blind stitch, universal blind stitch, elastic, cording, piping, beading, curved beading and gathering feet. Single feet cost less if you only hem or sew elastic.

Price range: Check current Amazon price

View on AmazonAd

Our take

We would start with the model number and the shank, and only then pick a foot. For a TL, we would buy high shank screw-on feet in a few useful types, such as a 1/4 inch foot and a zipper foot, rather than a big generic set. On an HZL DX, F or G, check first that the snap-on holder is there. Then add feet one at a time. For the NX7 and DX3000QVP family, the high/low shank adapter lets you use low shank feet. Check that the foot is listed for your model. We would only buy the full 8-piece serger kit if you will really use cording, piping and beading. If you only hem or sew elastic, one blind stitch or elastic foot is enough.

What owners report

  • Many users report that the Juki TL-2010Q takes high shank feet, the same ones used on the Janome 1600P, Brother PQ1500S, Baby Lock Jane and single needle industrials. They add that these feet are cheap and come in many styles. The thread is old. Source
  • Some users on a forum thread about the Juki HZL-F600 say that snap-on feet from Baby Lock, Janome or Elna fit it, and one reports that a Pfaff low shank adapter worked well. Another asks whether all low shank feet are really interchangeable, so the answer is not settled in that thread. Source

Common buying mistakes

  • Buying by brand name alone. Juki makes both high shank and low shank machines, so the word Juki in a listing says little.
  • Ordering high shank feet for an HZL DX, F or G model, or low shank feet for a TL.
  • Buying a snap-on foot set for a TL. TL machines are screw-on.
  • Expecting the snap-on holder to take a walking foot or a free motion foot.
  • Using MO-1000 serger feet on older MO models without checking the model list.
  • Buying a 25-piece generic set for a zigzag machine when it is built for straight stitch industrial machines.

Good to know

How do I tell which foot system my Juki uses?

Start with the model number on the machine, not with the foot listing. TL machines and J-150QVP are high shank screw-on. HZL DX5, DX7, F and G models are low shank snap-on. NX7, DX3000QVP, DX4000QVP and UX8 are high shank snap-on. MO models are sergers with their own feet. If your number is not in this list, check the manual or the seller's compatibility list before you buy.

Do TL feet fit HZL machines, or the other way round?

No. TL feet are high shank and made for straight stitch machines, so a low shank HZL foot sits at the wrong height on a TL. Going the other way, a high shank foot is not a drop-in for a low shank HZL either. Treat the two families as separate shopping lists.

What does the Juki snap-on holder do, and what can it not do?

The holder screws onto the presser bar and lets you snap on most feet. One Juki parts dealer says it covers almost all feet except free motion quilting feet and the walking foot. For those two, buy a screw-on version that is listed for your model.

Which feet fit the NX7, DX3000QVP, DX4000QVP and UX8?

These are high shank models. Juki snap-on feet made for these models fit directly. Low shank feet will work if you add the Juki high/low shank adapter. The HZL-LB5020 and LB5100 are a different case: one retailer says Janome made them and that they take Janome feet.

Which feet fit Juki MO sergers?

Serger feet are model specific. The 8-piece kit 40149062 is listed for the MO-1000 and MO-2000QVP. The tractor foot is listed for the MO-1000, MO-2000QVP, MO-2800 and MO-3000QVP. Older sergers like the MO-114 or MO-654 sit in a separate group at one dealer, so match the exact model.

Is a generic foot set marked 'fits Juki' safe to buy?

Only if the shank type matches your machine. Some large sets are described as high shank sets for Singer-style industrial single needle machines, while naming Juki TL and DDL models in the title. On a low shank HZL these will not fit directly. Read the shank line in the listing first.

What others say

For Juki MO-series owners, the Juki Blind Stitch Foot 40138091 is a strong choice for compatible MO-1000 and MO-2000 series sergers.
ThreadWorks

Our view: Good advice for MO-1000 and MO-2000 owners. The guide covers only sergers. It says nothing about shank types or how to tell which Juki family you own.

FAQ

Are Juki TL series feet high shank?

Yes. Retailers list the TL-98, TL-2000Qi, TL-2010Q and TL-18QVP with high shank screw-on feet, and a forum thread says they share feet with the Janome 1600P and Brother PQ1500S.

Are Juki HZL F300, F400 and F600 low shank?

Yes. A Juki parts dealer and a sewing retailer both list the F series as low shank, and the dealer's snap-on holder is listed for them.

Can I use Janome or Baby Lock snap-on feet on a Juki F600?

Some forum users say they work. That thread is old and not an official statement, so treat it as a hint and check the exact foot for your model before you buy.

Do I need an adapter for the Juki NX7?

Only if you want to use low shank feet. The NX7 is a high shank model. Snap-on feet fit directly, and low shank feet need the Juki high/low shank adapter.

Will MO-1000 feet fit an MO-2800?

Not always. The tractor foot is listed for both, but dealer listings for single feet are inconsistent. One dealer says its gathering foot fits only the MO-1000 and MO-2000, while the same listing names other MO models. Check the part listing for your exact model.

More guides

Sources

Last checked:

WR

About the author: Will Riegger

Editor in charge