As an Amazon Associate we earn from qualifying purchases. This does not change your price.
Our picks

Low shank snap-on adapter (ankle)
It turns a screw-on low shank machine into a snap-on one, so you can use common snap-on feet and sets. It only works if your machine is truly low shank.
View on AmazonAdHigh shank presser foot set
A set saves you from ordering single feet one by one. Check that the listing says high shank and read the compatibility list.
View on AmazonAdLow shank presser foot set
The most common type of set. Good starter option when you have no manual and your machine is a standard home model.
View on AmazonAdSlant shank snap-on presser foot set
Feet labeled slant shank are the only ones that fit. A snap-on shank with a set gives you more foot choices.
View on AmazonAdDigital caliper or small metal ruler
Useful to measure the shank height and screw hole position of your current foot. Compare the numbers with the seller's specifications, not with guesses.
View on AmazonAdCommon buying mistakes
- Buying a foot because it says 'universal' without checking the shank type.
- Assuming that all snap-on feet are low shank. Some high shank machines use snap-on feet too.
- Treating a slant shank machine as low shank because the foot looks similar.
- Ordering a low shank walking foot for a high shank machine and hoping an adapter will fix it.
- Using the brand name alone. Brother, Juki, Janome and Baby Lock all make both low shank and high shank machines.
- Skipping listings that show the foot only from the front. You need a side view to judge the shank.
Good to know
What is the actual difference between low shank and high shank?
The shank is the part that connects the foot to the presser bar. On a high shank foot it sits higher above the needle plate than on a low shank foot. The machine is built around one height, so the foot must match it. A low shank foot on a high shank machine will not reach the right working position, and the reverse will not work either.
How do I find my shank type without a manual?
Start with the model number and search it with 'presser foot shank'. Many makers publish manuals as PDFs. If the model number is worn off, look for the brand and the era of the machine and check the table above. If you still cannot tell, remove your current foot, photograph it from the side, and compare it with listing photos. Only buy from sellers who state the shank type.
Can I use an adapter to make a high shank foot fit a low shank machine?
Adapters exist for one case that matters: a low shank snap-on adapter lets you use snap-on feet on a low shank screw-on machine. Do not expect an adapter to convert a high shank foot to low shank or the other way round. For walking feet, the shank is part of the foot, so you need the correct version.
Why do so many listings say 'fits most machines'?
That wording usually means 'fits most low shank snap-on machines'. It does not cover high shank, slant shank, Bernina or Janome 9 mm models. Treat it as a hint, not a guarantee. Compare the compatibility list with your model and ask the seller if it is unclear.
My machine is a quilting or semi-industrial model. Is it likely to be high shank?
Some are, but not all. Several long arm style and straight stitch quilting models from Brother, Juki, Janome and Baby Lock use a high shank. Check your specific model rather than assuming, because many quilting machines also use a low shank.
FAQ
Is my Singer low shank or high shank?
It depends on the model. A Featherweight 221/222 is low shank. Singer 301, 401, 403, 500, 503 and 600 series machines are slant shank. Many modern Singer home models are low shank snap-on. Check your model number to be sure.
Are Brother machines low shank or high shank?
Most Brother home machines are low shank snap-on. Some quilting models such as the PQ1500S/SL are high shank. Check the model before ordering.
Do low shank feet fit a high shank machine?
No. The shank height differs, so the foot will not work correctly. Buy feet labeled for high shank.
What is a slant shank?
A slant shank machine has a tilted needle bar. It needs feet made for that angle. Many older Singer models from the 1950s and 1960s are slant shank.
Do Bernina and Janome 9 mm machines follow the low and high shank rule?
Not in the same way. Bernina uses its own system with old and new style adapters, and Janome 9 mm models take their own high shank snap-on feet. Buy feet listed for your exact model.
Can I measure the shank to be sure?
You can use measurements to compare your foot with a listing, but only if the seller gives the shank dimensions. Without that information, rely on your model number and the seller's compatibility list.
More guides
- Brother Sewing Machine Presser Foot Compatibility List
- Which presser foot fits my Singer? Find it by model number
- How to check Janome presser foot fit
- Which zipper foot fits my sewing machine?
- Which buttonhole foot fits my sewing machine?
- Walking Foot Compatibility by Sewing Machine Model
- Overcast foot for your sewing machine: how to choose the right model
- Snap-on presser foot adapters: what fits which machine
- Screw-on vs snap-on presser feet: what is the difference?