As an Amazon Associate we earn from qualifying purchases. This does not change your price.
Our picks
Brand one-step buttonhole foot for your model (Brother, Janome, Singer or Baby Lock)
One-step feet are built to work with the machine's buttonhole lever or sensor. You place the button in the foot or set the length, and the machine sews the whole buttonhole. The brand foot for your model number is the safest match.
View on AmazonAdLow shank snap-on buttonhole foot (4-step, with slide)
It attaches to the common low shank snap-on ankle and gives you a button slide for sizing. It is a good budget option when your machine has no one-step system.
View on AmazonAdHigh shank buttonhole foot
Low shank buttonhole feet do not fit these machines. A foot labeled high shank gives you the correct attachment and height.
View on AmazonAdSlant shank buttonhole foot or buttonholer attachment
Slant shank machines need parts labeled slant shank. A buttonholer attachment with templates is the classic solution for machines without a built-in buttonhole stitch.
View on AmazonAdVintage low shank buttonholer attachment
The attachment moves the fabric in a pattern, so a straight stitch machine can sew a buttonhole. It comes with templates for different sizes.
View on AmazonAdBernina buttonhole foot for your model
Bernina buttonhole feet are numbered and depend on the machine and its system. Use the foot list for your model and order that exact foot.
View on AmazonAdButtonhole cutter chisel set with wood block
A chisel and block cut the opening in one press and are more precise than a seam ripper. A seam ripper works too if you place pins at both ends.
View on AmazonAdCommon buying mistakes
- Buying by shank only for a one-step system. The foot may attach but not work with your machine's buttonhole lever or sensor.
- Ordering a listing that does not name your brand or model, then finding out it is for a different system.
- Mixing up low shank and slant shank on older Singer machines. Nothing labeled low shank fits a slant shank machine.
- Skipping the test on scrap. Different layers and stabilizer change the result, so test before you sew on the garment.
- Cutting the opening without pins at the ends. One slip can cut through the bartack.
- Choosing a one-step foot for a machine that only has a 4-step dial.
Good to know
What is the difference between a one-step and a 4-step buttonhole foot?
A one-step foot lets the machine sew the whole buttonhole after a single setup. It senses the button size or uses a slide, then stops. A 4-step foot is simpler. You sew one side, the bartack, the other side and the second bartack, changing the setting each time. The 4-step method works on basic machines but needs more practice for matching buttonholes.
Will a generic buttonhole foot work on my machine?
Physically it may, if the shank matches. Functionally it depends on the system. A basic 4-step foot on a standard low shank snap-on machine often works. A one-step foot usually relies on a lever or sensor on the machine, so a generic foot may not trigger it. If the listing does not name your brand or model, ask the seller before you buy.
How do I size the buttonhole?
Measure the button across its widest point and add the thickness of the button. Many one-step feet have a slide that holds the button and sets the length for you. On 4-step machines you set the length by the markings on the foot or by counting stitches. For flat, standard buttons this works well. For domed or odd shaped buttons, sew a test and try the button.
What do I need besides the foot?
Use a stabilizer or interfacing under the fabric on light or stretchy material. Test on a scrap with the same layers as the garment. Cut the opening with a chisel and block or with a seam ripper. Place a pin across each end so you do not cut through the bartack.
What if my machine cannot sew a buttonhole at all?
Straight stitch machines, like the Singer Featherweight 221, need a buttonholer attachment with templates. These attachments are mostly found used. Make sure the attachment matches your shank and your machine, and that the templates and screws are included. If that sounds like too much work, you can also sew buttonholes by hand or have them made by a tailor.
FAQ
Can I use a Brother buttonhole foot on a Janome?
Not reliably. Even if both are low shank snap-on, the buttonhole systems differ. Buy the foot listed for your machine brand and model.
Does a buttonhole foot fit every low shank machine?
No. Low shank only tells you how the foot attaches. A one-step or sensor foot also has to work with your machine's buttonhole system. A basic 4-step foot has a better chance on a standard low shank snap-on machine.
Do I need a buttonhole foot at all?
If your machine has a buttonhole stitch, yes. The foot is part of the system. If your machine only has zigzag, you can make buttonholes by hand with a satin stitch, but a buttonhole foot makes it easier and more even.
How do I find the right foot if I have no manual?
Note the brand and model number on the machine, usually on the back or underneath. Check the stitch chart for a buttonhole symbol. Look up the manual online by model number. Then confirm your shank type using the table on our main page.
Which buttonhole foot is best for beginners?
A one-step foot made for your model is the easiest, because the machine sets the size and the stitch count. If your machine has no one-step option, a 4-step foot with a slide is a fine start.
More guides
- Brother Sewing Machine Presser Foot Compatibility List
- Which presser foot fits my Singer? Find it by model number
- How to check Janome presser foot fit
- Low shank or high shank presser foot: how to tell which one you have
- Which zipper foot fits my sewing machine?
- Walking Foot Compatibility by Sewing Machine Model
- Overcast foot for your sewing machine: how to choose the right model
- Snap-on presser foot adapters: what fits which machine
- Screw-on vs snap-on presser feet: what is the difference?