As an Amazon Associate we earn from qualifying purchases. This does not change your price.
Which replacement presser foot fits my machine?
- What exactly is missing: the foot, the holder, or the screw?Look at what is still on the presser bar. A screw-on foot mounts directly. A snap-on foot needs a holder (shank) on the bar first.
- How far is the center of the screw from the needle plate?Lower the presser bar and measure to the screw center. About 1/2 inch is low shank, about 1 inch is high shank. A visibly angled shank means slant.
- Does your foot screw on, snap on, or clip on with a lever?Most home machines screw on or snap on. Bernina uses its own system and needs its own #75 adapter to take low shank feet.
- What is your machine's maximum stitch width?Feet are made for 5 mm and 7 mm machines. A foot with a too narrow slot can be hit by the needle at full zigzag width.
Quick reference
| Your machine | Shank / system | What to buy | Watch out |
|---|---|---|---|
| Most current home machines with screw-on feet | Low shank, about 1/2 inch | Any low shank foot that clears your stitch width | 5 mm and 7 mm versions exist, check the width |
| Machine with a snap-on holder on the bar | Low shank snap-on | Snap-on feet, or a low shank snap-on adapter if the holder is gone | Only buy the foot if the holder is intact |
| Older Kenmore, some quilting machines | High shank, about 1 inch | High shank feet, or a low shank adapter plus low shank feet | An adapter works one way only: high shank to low |
| Singer slant needle machines | Slant shank | Slant shank feet only | Search with your exact model number |
| Older Bernina models | Bernina old style | Old style low shank adapter, then low shank feet. The #75 is the new style part, so do not order it for an old style machine. | Old style and new style adapters differ |
| Bernina Activa, Artista, Aurora, Virtuosa | Bernina new style | #75 adapter, new style, then low shank feet | One seller lists new style as machines made after 1996. Treat that as a hint and confirm with your model name. |
| Brother PC8200, PC8500 or ULT with a walking foot | Low shank, needs adapter | SA140 walking foot plus the Brother low shank adapter | Sellers name an SA130 or SA131 adapter for these models. Check the listing for your exact model. |
Our picks

Brother SA140 walking foot, 7 mm, low shank
Genuine part with a clear fit statement: low shank, screw on, up to 7 mm zigzag. Brother also makes other walking feet, so match the number to your manual.
View on AmazonAdGeneric even feed walking foot with quilt guide, low shank
Some listings are sold as SA140 style replacements. We have not tested any of them. Confirm your stitch width and read the return terms before you order.
View on AmazonAdLow shank snap-on adapter (holder)
The holder is a separate part, so a new foot alone will not help. High shank machines need a high shank snap-on adapter instead.
View on AmazonAdBernina #75 adapter (new style) or old style low shank adapter
The adapter attaches to the presser bar so screw-on low shank feet fit. Old style and new style are sold as separate parts, so match your model.
View on AmazonAdSlant shank presser foot for Singer
A slant shank foot fits only a slant needle Singer, and that machine takes no other foot type. Search with the exact model number.
View on AmazonAd1/4 inch piecing foot, low shank
Cheap, so a low-risk first purchase. If it fits, your low shank measurement was right. Check the foot's slot against your needle position.
View on AmazonAdOur take
Measure first, then buy. The shank height decides almost everything. For a standard low shank machine, we would take a generic 1/4 inch or zipper foot as the cheap test and spend more only on a walking foot. For a walking foot we would choose the original or a clearly labeled equivalent, and confirm your model's adapter needs. Skip the large kit if you only need one foot, unless you will use the rest. Fit problems come from shank height and stitch width, not from the number of pieces. Bernina and Singer slant needle owners should buy only parts that name their exact system.
What owners report
- Some buyers report that a Kenmore high shank presser foot set did not work together as shown. In one review, the walking foot and free motion foot would not go onto the included adapter because of its shape. Source
- A buyer of a generic snap-on low shank foot reports that the foot itself was fine but did not fit their machine, even though the listing called it generic. Source
- One buyer of a low shank snap-on adapter reports it fit neither a low shank nor a slant shank vintage Singer. The needle struck the foot and missed the hole in the needle plate. Source
Common buying mistakes
- Ordering a foot before measuring the shank. Looks alone do not tell low shank from high shank.
- Buying a foot set when only the holder is missing. Feet do not help without the shank or adapter.
- Ignoring maximum stitch width. A foot made for 5 mm can be hit by the needle on a 7 mm machine.
- Assuming 'universal' means every machine. Slant shank Singers and Bernina need their own parts.
- Buying an industrial flat machine kit for a home machine.
- Mixing Bernina old style and new style adapters.
Good to know
How do I find a replacement for a lost presser foot?
Start with what is left on the machine, not with the foot you lost. Check whether the foot screwed on or snapped on, then measure from the center of the screw to the needle plate with the bar lowered. If you still have a manual or know the exact model number, search with that, because several brands make more than one version of the same foot. Only then pick the foot type, such as zipper, walking foot or 1/4 inch.
How do I tell low shank from high shank?
Most sources put low shank at about 1/2 inch (13 mm) and high shank at about 1 inch (25 mm), measured from the screw center to the needle plate. Some retailers quote slightly different figures, for example 3/4 inch for low shank, and some sell a separate medium shank. If your measurement falls between the two, check the machine model against the seller's compatibility list or ask before you order.
Can I use a low shank foot on a high shank machine?
Yes, with a low shank adapter. The reverse does not work: a high shank foot on a low shank machine sits too high to press the fabric. If your high shank machine takes snap-on feet, a high shank snap-on adapter bridges the extra distance. Check the adapter shape against the foot before you buy, because mismatched adapter and foot sets are a known complaint.
Should I buy an original foot or a generic one?
For a standard low shank machine, a generic zipper, 1/4 inch or all-purpose foot is a low-risk buy. For a walking foot, we lean toward the original or a clearly labeled equivalent. Brother, for example, sells several walking feet that differ in feed dog size and shank height, and the SA140 needs an adapter on some PC and ULT models. For Bernina and Singer slant needle machines, match the exact adapter or foot type first.
Why do industrial kits show up when I search for a home machine foot?
Many 'universal' kits are made for industrial flat machines. They bundle shuttle parts, needle plates and feet for single needle industrial heads. A home machine with a screw-on or snap-on low shank bar needs a household foot, so check that a listing names low shank, snap-on or your brand and model.
What others say
Fits most home domestic sewing machines built after 1980 that have a low-shank system
Our view: Roughly right for standard home machines, but the build year is a seller rule of thumb, not a standard. Measure your shank instead of trusting a date, and note that it says nothing about stitch width.
Designed to fit most industrial flat sewing machines
Our view: This kit is for industrial flat machines and bundles needle plates and shuttle parts. It is the wrong result for a home machine, so skip it unless you own an industrial single needle machine.
FAQ
Is my sewing machine low shank?
Most current home machines are low shank. Lower the presser bar and measure from the screw center to the needle plate. About 1/2 inch is low shank, about 1 inch is high shank.
Do snap-on feet fit every machine?
No. Snap-on feet need a snap-on holder that fits your shank height. Low shank snap-on feet are common, and high shank machines need a high shank snap-on adapter.
My foot fits but the needle hits it. Why?
The needle slot is probably too narrow for your zigzag width. Use a foot rated for your machine's maximum stitch width, usually 5 mm or 7 mm.
Which Bernina part do I need for low shank feet?
For new style models (Activa, Artista, Aurora, Virtuosa) the #75 adapter. Old style models use a different, old style low shank adapter. Sellers list model ranges for each, so match your model before ordering.
Do Singer slant needle machines take normal feet?
No. Slant shank feet fit only Singer slant needle machines, and those machines take no other foot type.
Does the Brother SA140 fit every Brother?
No. It is a low shank screw-on walking foot for up to 7 mm zigzag. Sellers say some Brother PC and ULT models need a low shank adapter.
More guides
- Brother Sewing Machine Presser Foot Compatibility List
- Which presser foot fits my Singer? Find it by model number
- How to check Janome presser foot fit
- Low shank or high shank presser foot: how to tell which one you have
- Which zipper foot fits my sewing machine?
- Which buttonhole foot fits my sewing machine?
- Walking Foot Compatibility by Sewing Machine Model
- Overcast foot for your sewing machine: how to choose the right model
- Snap-on presser foot adapters: what fits which machine
- Screw-on vs snap-on presser feet: what is the difference?
- Which presser foot for leather and denim?
- Original or universal presser foot: which one should you buy?
- Which presser foot fits my snap-on sewing machine?
- Which presser foot fits my Juki?
Sources
- Presser foot (Wikipedia)
- Will This Presser Foot Fit My Sewing Machine? (Madam Sew)
- Presser Foot Guide (Red Deer Sewing)
- Sewing Machine Presser Feet: Types and Uses Guide (Bsewinn)
- Brother SA140 Walking Foot (AllBrands)
- Sew Tech SA140 Walking Foot (AllBrands)
- Brother SA140 Walking Foot for PC8200, PC8500, ULT (SewingMachine.com)
- Brother SA140 Walking Foot 7mm (Sewing Machine Outlet)
- Amazon.com listing, ckpsms 11 piece presser feet kit
- Amazon.com listing, Yosoo 17 piece kit
- Are Brother Sewing Machines Low Shank? Types & Compatibility Guide
- What Is a Low Shank Sewing Machine? Simple Guide for Sewers
- What is a Low Shank Sewing Machine? A Guide to Shank Heights
- SEWING MACHINE COMPATIBILITY
Last checked:
About the author: Will Riegger
Editor in charge