As an Amazon Associate we earn from qualifying purchases. This does not change your price.
Our picks
Brother SA140 walking foot
It feeds the top layer at the same rate as the bottom layer, so layers do not shift. It is made for Brother's snap-on system. Check the opening width against your stitch width, because the foot limits how wide a zigzag can be.
View on AmazonAdBrother SA185 1/4 inch foot with guide
It gives you a consistent seam allowance for piecing. The guide helps you keep the fabric edge straight. Check that the listing names your model family or low shank snap-on.
View on AmazonAdHigh shank walking foot XA7253001
These machines are high shank, so the usual Brother snap-on feet will not fit. Buy only a foot that is listed as high shank, either the original or an equivalent.
View on AmazonAdLow shank snap-on presser foot set
A set costs less than buying single feet. Match the listing to snap-on, low shank and check the included feet against what you actually sew.
View on AmazonAd
Low shank snap-on adapter (ankle)
It replaces the old screw-on holder with a snap-on one, so most low shank snap-on feet fit. Check first that your machine really is low shank.
View on AmazonAdCommon buying mistakes
- Buying by brand name only. Brother makes low shank and high shank machines, so match the shank type, not the brand.
- Buying a low shank SA140 walking foot for a PQ1500S or PQ1500SL. The PQ machines are high shank.
- Buying sewing feet for an embroidery-only machine. They use their own embroidery foot.
- Not checking whether the machine has built-in dual feed before buying a separate walking foot.
- Ignoring the foot opening width. A narrow walking foot or 1/4 inch foot limits zigzag width, so test with a straight stitch first.
- Skipping the model number in the search. Always search 'Brother' plus your exact model plus the foot code.
Good to know
How do I know if my Brother takes snap-on feet?
Raise the presser foot lever and look behind the foot. A snap-on foot sits on a holder with a small lever or notch at the back. Press it and the foot should drop off. If a single screw holds the foot to the bar, it is screw-on. The vast majority of current Brother home models are snap-on.
Can I use a generic foot on a Brother?
Yes, if the listing says low shank snap-on and the foot design matches the Brother holder. Generic feet from reputable sellers often work. Still compare the shape of the foot and the position of the notch with your old foot. If your machine is a PQ1500 series, only high shank feet will work.
When does a walking foot not fit?
A walking foot is a foot with a fork that straddles the needle clamp screw. It will not fit if the shank type is wrong. It can also be a poor choice on machines that already have built-in dual feed. Check the manual of the machine before you buy. Note the opening width too: a narrow foot opening limits zigzag and decorative stitches.
Which foot do I need for quilting on a Brother?
For piecing, a 1/4 inch foot with guide such as the SA185 is a good start. For quilting through three layers, a walking foot such as the SA140 helps stop shifting. For free motion work you need a separate darning or free motion foot made for your shank type. On a PQ1500 series, buy high shank versions of all of these.
FAQ
Do all Brother sewing machines use the same presser feet?
No. Most home models use low shank snap-on feet. The PQ1500 series uses high shank screw-on feet, embroidery-only machines use embroidery feet, and some older models are screw-on. Check your model before you buy.
Which walking foot fits my Brother?
For low shank snap-on models, the Brother SA140 is the usual choice. For the PQ1500S and PQ1500SL, look for a high shank walking foot such as XA7253001 or an equivalent. If your machine has built-in dual feed, check the manual first.
Which 1/4 inch foot fits my Brother?
The SA185 is a 1/4 inch foot with guide made for Brother low shank snap-on machines. Confirm that your model supports it before ordering.
Will third-party feet work on my Brother?
Often yes, if they are listed as low shank snap-on and match the holder design. Read the listing and reviews for your model family. For high shank machines, buy only high shank feet.
Where do I find my Brother model number?
Look at the label on the back or the underside of the machine. It is often near the power switch or the serial number. Use that number to find the manual and the accessory list.
Can I use an adapter to fit a high shank foot on a low shank Brother?
We do not recommend it. Shank height is part of how the foot sits over the needle plate. Buy feet made for your shank type.
More guides
- Which presser foot fits my Singer? Find it by model number
- How to check Janome presser foot fit
- Low shank or high shank presser foot: how to tell which one you have
- Which zipper foot fits my sewing machine?
- Which buttonhole foot fits my sewing machine?
- Walking Foot Compatibility by Sewing Machine Model
- Overcast foot for your sewing machine: how to choose the right model
- Snap-on presser foot adapters: what fits which machine
- Screw-on vs snap-on presser feet: what is the difference?