☰ Menu
ShankCheck › Guides
Find the right presser foot

Which zipper foot fits my sewing machine?

A zipper foot only works if it fits your shank and suits the zipper you are sewing in. Most people get one of the two wrong. This page covers the zipper part only. Find your shank type on the main page first, then pick the foot style below: standard, adjustable or invisible. We earn a commission when you buy through our links. That does not change what we recommend.

Find your match →
Independently researchedSources linkedNo extra cost to you

As an Amazon Associate we earn from qualifying purchases. This does not change your price.

Our picks

Top pick

Low shank snap-on zipper foot

For: Most modern home machines with a snap-on ankle, including many Brother, Janome, Singer and Baby Lock models.

The most common type. Snaps on in seconds and works for standard zippers in seams, bags and pillows. Check that the listing says low shank snap-on and not just snap-on.

Price range: Roughly $5 to $15. Assumption, check the

View on AmazonAd

Invisible (concealed) zipper foot, low shank snap-on

For: Anyone sewing dresses, skirts or cushion covers with invisible zippers on a low shank snap-on machine.

The two grooves guide the coil so you can stitch close to the teeth. A standard zipper foot is a workaround, this one is made for the job.

Price range: Roughly $6 to $15. Assumption, check the

View on AmazonAd

Adjustable zipper foot, low shank screw-on

For: Older screw-on machines such as Kenmore, Elna or White with a low shank bar.

A sliding body lets you move the foot to either side of the needle. Useful for lapped zippers and long zippers.

Price range: Roughly $5 to $12. Assumption, check the

View on AmazonAd

High shank zipper foot

For: Owners of high shank machines such as some Juki, Janome and Baby Lock models.

A low shank zipper foot will not fit a high shank bar. Buy a foot listed for high shank and check the bar height first.

Price range: Roughly $6 to $15. Assumption, check the

View on AmazonAd

Slant shank zipper foot

For: Owners of Singer slant needle machines such as the 301, 401 or 500 series.

Only feet labeled slant shank fit these machines. Look for the word slant in the product title.

Price range: Roughly $6 to $15. Assumption, check the

View on AmazonAd

Low shank snap-on presser foot set with zipper foot

For: Beginners with a low shank snap-on machine who also want a few other feet.

A set usually includes a zipper foot and often a concealed zipper foot, a 1/4 inch foot and others. Check the contents list for the zipper feet you need.

Price range: Roughly $15 to $40. Assumption, check th

View on AmazonAd

Common buying mistakes

  • Buying by brand name only. Shank type and attachment style decide fit.
  • Ordering a snap-on zipper foot for a screw-on machine, or the other way round.
  • Using a low shank foot on a high shank or slant shank machine.
  • Choosing a cording or piping foot when you need a concealed zipper foot.
  • Skipping the hand-wheel test. The needle can hit the foot and break.
  • Sewing over metal zipper teeth at full speed.

Good to know

What is the difference between a standard and an invisible zipper foot?

A standard zipper foot is narrow and lets the needle sit right beside the zipper teeth. You see the stitch line on the finished garment. An invisible zipper foot has grooves that hold the coil open so you stitch beside it, and the zipper disappears into the seam. Many sewists use a standard foot for invisible zippers, but you get less control over how close you sew.

How do I know which side of the foot the needle goes through?

Most zipper feet have a notch or opening on both sides, or an adjustable body. Hand-turn the wheel one full stitch before you start sewing. If the needle touches the foot, change the needle position or move the foot. Do this every time, especially on a new foot.

Will a zipper foot from one brand fit another brand?

Often yes, if both machines share the same shank type and attachment style. A low shank snap-on foot is built for a standard low shank snap-on ankle, which many Brother, Janome and Singer home machines use. Bernina and some entry-level machines use their own feet. Always read the listing for your machine or shank type, not just the brand.

Do I need a special zipper foot for a walking foot or an AcuFeed machine?

If you use a walking foot attachment, you generally cannot use it with a zipper foot at the same time. Swap feet for the zipper step. Some machines list a dedicated zipper foot for their built-in feed system. Look for your machine's model in the listing.

Can I sew a zipper without a zipper foot?

You can, but it is hard to stitch close to the teeth, and the result is rarely neat. A zipper foot costs little compared to a ruined garment, and it works for bags, pillows and clothing.

FAQ

Does one zipper foot fit all sewing machines?

No. The foot must match your shank type (low, high or slant) and attachment style (snap-on or screw-on). Some brands, such as Bernina, use their own system.

Can I use a regular zipper foot for an invisible zipper?

It can work, but a concealed zipper foot is made for the job. The grooves hold the coil open so you can stitch closer and get a cleaner result.

What is a low shank snap-on zipper foot?

It is a zipper foot that clicks onto the snap-on ankle found on most modern home machines. Low shank describes the bar height. Check your machine type on the main page if you are unsure.

Which zipper foot is best for beginners?

A standard or adjustable zipper foot for your shank type covers most jobs. Add an invisible zipper foot when you plan to sew dresses or skirts with concealed zippers.

How much does a zipper foot cost?

Generic feet are usually inexpensive. Prices vary by shank type, brand and whether you buy a single foot or a set. Check current prices on Amazon.

More guides